Yaqivent 轴流排烟风机 3D 选型界面,左侧显示选型参数,右侧显示三维风机模型

New Product Launch | Yaqivent Fan 3D Selection Center Goes Live: Online Selection, Real-Time Results and a Digital Sample Room in Your Browser

Dear customers, partners and HVAC colleagues,

Yaqivent has officially launched its Fan 3D Selection Center (https://yaqivent.com/en/fan-selection-center/). Following our digital product catalogue, this is another step forward in digital selection tools. Instead of searching through a thick printed catalogue, waiting for an email from sales or travelling to a factory to inspect a sample, you can now complete the entire process from selection and performance data to a visual inspection in one browser window.

Why did we build it?

After 33 years in ventilation equipment, we know the biggest frustrations customers face during fan selection:

  • Printed catalogues run to hundreds of pages, and finding the right operating point can take a long time;
  • After airflow and pressure requirements arrive, engineers must manually match a fan size, calculate motor power and verify dimensions, which can take half a day or more;
  • Remote customers can only review drawings and photos, leaving uncertainty about internal construction, duct connections and installation dimensions.

The Fan 3D Selection Center was developed to address these three problems.

What can it do for you?

The page presents a rotatable and zoomable 3D fan model alongside a clear selection panel. You only need to take three steps:

  1. Select centrifugal fan or axial fan at the top;
  2. Choose a single-speed or double-speed motor;
  3. Enter the required airflow (m³/h) and total pressure (Pa). You can enter one value or both.

The system searches the full performance catalogue in real time and recommends the most economical fan size. It also returns outline dimensions, inlet and outlet dimensions, motor power, speed, motor model, sound level, weight and the performance curve at the selected operating point. Empty fields are ignored, while completed fields use the smallest catalogue point that meets the requirement, avoiding unnecessary oversizing.

Fan 3D Selection Center interface with a 3D fan model on the left and airflow, pressure and recommended fan size on the right
Fan 3D Selection Center with the digital prototype and live selection data on one screen

More than a selector: a digital prototype you can take apart

The 3D model is not a static rendering. It is an interactive digital prototype with shortcut controls for different inspection modes:

  • Pause (Space): freeze the model for screenshots and proposals;
  • Exploded view (E): separate the main components to reveal the assembly structure;
  • Section view (C): cut through the casing to inspect the impeller and motor layout;
  • X-ray view (X): make the casing semi-transparent and show the complete airflow path from inlet through the impeller to the outlet;
  • Slow motion (S): reduce impeller speed to observe blade angle and rotation direction;
  • Component labels (L): identify key parts for customer presentations and internal training;
  • Bearing seizure (B): simulate a fault condition for after-sales training and risk discussions.
Yaqivent cabinet centrifugal fan in X-ray mode with a transparent casing and blue streamlines showing airflow
X-ray view: dynamic streamlines show airflow through the impeller and casing
Yaqivent cabinet centrifugal fan exploded view showing access panels, outlet, impeller assembly and motor
Exploded view: main components separated along the assembly direction
Yaqivent cabinet centrifugal fan section view showing the internal impeller and motor layout
Section view: inspect the impeller, casing and motor layout
Yaqivent cabinet centrifugal fan with labels for outlet dimensions, dual-inlet impeller, casing and twin belts
Component labels identify outlet dimensions, dual-inlet impeller, casing and twin belts

Together with the dimensional and scale information beside the model, you can quickly judge whether the installation space and connections will fit. For engineering companies that need remote design reviews, customer presentations or sales training, this brings the sample room into the browser.

Which fan ranges are available?

Two main ranges are available at launch:

  • Centrifugal fan selection: cabinet centrifugal fan boxes, HTFC fire and smoke exhaust fans and related models;
  • Axial fan selection: duct axial fans, fire and smoke exhaust axial fans, wall-mounted fans and related models.

A “More selection tools” entry is already reserved at the top. Roof fans, mixed-flow fans and damper selection tools will be added progressively.

Yaqivent axial smoke exhaust fan 3D selector showing HTF-D2 size 9 at 23,658 m3/h and 689 Pa
Axial fan selection with recommended size, performance data and 3D model updated together

Try it now

Open the selector: https://yaqivent.com/en/fan-selection-center/

If your project has special operating conditions, complex duct resistance or requires double-speed, explosion-proof or corrosion-resistant configurations, contact the Yaqivent technical team through the online service button or our Contact page. With 33 years of manufacturing experience, from Beijing Daxing International Airport to China Zun, our engineers remain directly involved in project support.

About Yaqivent

Yaqivent is a professional manufacturer with 33 years of experience in ventilation equipment. Our own factory is located in Dezhou, Shandong. Our product range covers centrifugal fans, axial fans, cabinet fan boxes, fire and smoke exhaust fans, dampers and air terminals for projects across Central Asia, Russian-speaking markets and worldwide. We believe good equipment starts with the right selection.

Copyright © 2026 Chongqing Yaqivent Trading Co., Ltd. (重庆亚奇纬特商贸有限公司). All Rights Reserved.